AISI 4130 Equal Tee Manufacturers and Suppliers:
AISI 4130 is a low-alloy steel that contains chromium and molybdenum as strengthening agents. A AISI 4130 Tee is a type of pipe fitting that has a T-shaped cross-section and is used to connect three pipes together at a 90-degree angle.
ISO Approved AISI 4130 Straight Tee Manufacturer In India, AISI 4130 Tee Pipe Fittings, AISI 4130 Unequal Tee, AISI 4130 Reducing Tee Dimensions Chart, Tolerances, Weight Chart
AISI 4130 tee is a pipe fitting made from AISI 4130 steel and designed to connect three pipes made from the same or compatible material. The AISI 4130 tee typically has one inlet and two outlets, and it can be used in a variety of applications, such as in piping systems for the oil and gas industry, aircraft and aerospace, and other high-stress environments.
AISI 4130 tees are known for their high strength, durability, and resistance to corrosion and wear. AISI 4130 tees are often used in applications where high pressure, high temperature, or corrosive conditions are present. AISI 4130 tees tees can be manufactured in a variety of sizes and shapes to meet specific application requirements.
We have the ready inventory of AISI 4130 Tees in the different size ranges of 1 Inch, 2 Inch, 4 Inch Equal & Unequal Tee.
AISI 4130 Equal Tee Standard Specifications
Standards
ANSI / ASME B16.9, MSS SP-43, API 590-605
Thickness
SCH10, SCH 20, SCH30, STD SCH40, SCH80, SCH60, XS, SCH100, SCH 120, SCH140, SCH 160, XXS available with NACE MR 01-75
Types
Welded | Seamless | Fabricated
Dimensions
ASME/ ANSI B16.9 | ASME B16.28 | MSS-SP-43 | BS1560 | BS4504 | BS10
Size Range (inches)
Seamless Tee ( 1/2″~24″)
ERW/Fabricated/Welded Tee (1/2″~48″)
Forms
Equal Tee, Straight Tee & Unequal Tee, Reducing Tee
AISI 4130 Equal Tee, UNS G41300 Unequal Tee, Werkstoff no. 1.7218 Reducing Tee. Get best Price List.
AISI 4130 Butt weld Tee Equivalent Grade
STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
---|---|---|---|---|---|---|---|
AISI 4130 | G41300 | 1.7218 | – | 25CrMo4 | JIS G4105 | BS 970 | – |
AISI 4130 Tee Pipe Fittings Chemical Composition
AISI 4130 | Ni | C | Mo | Mn | Si | Fe | Cu | S | P | Cr |
---|---|---|---|---|---|---|---|---|---|---|
0.50 max | 0.28-0.33 | 0.15-0.25 | 0.40-0.60 | 0.15-0.35 | 97.3-98.22 | – | 0.025 MAX | 0.035 MAX | 0.80-1.10 |
AISI 4130 Tee Mechanical Properties
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
---|---|---|---|---|
0.28 | 2580 | 460 MPa | 560 MPa | 20 % |
AISI 4130 Tees Dimensions and Weights Chart
AISI 4130 Buttweld Tee - Equal/Straight Tee & Unequal/Reducing Tee - Dimensions and Weights Chart
Dimensions and weights of Equal/Straight Tee & Unequal/Reducing Tee (NPS 1/2 to 24, schedule STD/XS)
Buttweld Tee Nominal Size |
Pipe Tee Outside Diameter Y |
Pipe Tee Wall Thickness T |
Buttweld Tee Dimensions (C and M) |
Buttweld Tee Weight |
||
---|---|---|---|---|---|---|
mm | in | mm | mm | Schedule | mm | mm |
15 | 1/2” | 21.3 | 2.78 | STD | 25.4 | 0.58 |
3.73 | X.S | 25.4 | 0.21 | |||
20 | 3/4” | 26.7 | 2.87 | STD | 28.6 | 0.21 |
3.91 | X.S | 28.6 | 0.27 | |||
25 | 1” | 33.4 | 3.38 | STD | 38.1 | 0.34 |
4.55 | X.S | 38.1 | 0.43 | |||
32 | 11/4” | 42.2 | 3.56 | STD | 47.6 | 0.64 |
4.85 | X.S | 47.6 | 0.75 | |||
40 | 11/2” | 48.3 | 3.68 | STD | 57.1 | 0.95 |
5.08 | X.S | 57.1 | 1.13 | |||
50 | 2” | 60.3 | 3.91 | STD | 63.5 | 1.45 |
5.54 | X.S | 63.5 | 1.72 | |||
65 | 21/2” | 73.0 | 5.16 | STD | 76.2 | 2.45 |
7.01 | X.S | 76.2 | 2.95 | |||
80 | 3” | 88.9 | 5.49 | STD | 85.7 | 3.45 |
7.62 | X.S | 85.7 | 4.3 | |||
100 | 4” | 114.3 | 6.02 | STD | 105.0 | 5.7 |
8.56 | X.S | 105.0 | 7.3 | |||
125 | 5” | 141.3 | 6.65 | STD | 124.0 | 9.1 |
9.5 | X.S | 124.0 | 11.8 | |||
150 | 6” | 168.3 | 7.11 | STD | 143.0 | 13.6 |
10.97 | X.S | 143.0 | 19.0 | |||
200 | 8” | 219.1 | 8.18 | STD | 178.0 | 25.0 |
12.7 | X.S | 178.0 | 33.5 | |||
250 | 10” | 273.0 | 9.27 | STD | 216.0 | 41.0 |
12.7 | X.S | 216.0 | 54.0 | |||
300 | 12” | 323.9 | 9.52 | STD | 254.0 | 57.0 |
12.7 | X.S | 254.0 | 77.0 | |||
350 | 14” | 355.6 | 9.52 | STD | 279.0 | 73.0 |
12.7 | X.S | 279.0 | 93.0 | |||
400 | 16” | 406.4 | 9.52 | STD | 305.0 | 91.0 |
12.7 | X.S | 305.0 | 120.0 | |||
450 | 18” | 457.0 | 9.52 | STD | 343.0 | 127.0 |
12.7 | X.S | 343.0 | 165.0 | |||
500 | 20” | 508.0 | 9.52 | STD | 381.0 | 227.0 |
12.7 | X.S | 381.0 | 270.0 | |||
600 | 24” | 610.0 | 9.52 | STD | 432.0 | 345.0 |
12.7 | X.S | 432.0 | 430.0 |
AISI 4130 Reducing Tee Tolerance
Buttweld Fittings ASME B16.9 Tee Tolerance | Tee | |||
---|---|---|---|---|
Buttweld Fitting Dimension (NPS) | Outside Diameter at Bevel |
Inside Diameter at End |
Wall Thickness T | Center-to-End Dimension A ,C ,B |
1/2 to 2-1/2 | +0.06 | Not less than 87.5% of nominal thickness |
+/- 0.06 | |
-0.03 | ||||
3 to 3-1/2 | +/- 0.06 | +/- 0.06 | +/- 0.06 | |
4 | +/- 0.06 | +/- 0.06 | +/- 0.06 | |
5 to 8 | +/- 0.06 | +/- 0.06 | +/- 0.06 | |
10 to 18 | +0.16 | +/- 0.12 | +/- 0.09 | |
-0.12 | ||||
20 to 24 | +0.25 | +/- 0.19 | +/- 0.09 | |
-0.19 | ||||
26 to 30 | +0.25 | +/- 0.19 | +/- 0.12 | |
-0.19 | ||||
32 to 48 | +0.25 | +/- 0.19 | +/- 0.19 | |
-0.19 |
AISI 4130 Unequal Tee Applications
Oil and Gas
Nuclear Power & Defence
Petrochemical
LNG
Desalination
Mining & Minerals
Myanmar, Nepal, Thailand, Vietnam, Philippines, Malaysia, Indonesia,
Singapore, Taiwan, Tasmania, Sri Lanka, Bangladesh, Bhutan, Cambodia,
Australia, New Zealand, Afghanistan, Tajikistan, Kyrgyzstan, Kazakhstan,
Uzbekistan, Turkmenistan, Iran, United Arab Emirates(UAE), Saudi Arabia,
Oman, Yemen, Iraq, Azerbaijan, Turkiye, Syria, Lebanon, Israel, Kenya,
Egypt, South Sudan, Eritrea, Djibouti, Ethiopia, Libya, Rwanda, Mali,
Niger, Chad, Central Africa Republic, Nigeria, Cameroon, Somalia, DRC,
Uganda, Tanzania, Angola, Zambia, Madagascar, Malawi, Namibia, Benin,
Zimbabwe, Botswana, Lesotho, South Africa, Algeria, Tunisia, Morocco,
Eswatini, Liberia, Sierra Leone, The Gambia, Senegal, Mozambique, Togo,
Mauritania, Burkina Faso, Ghana, Equatorial Guinea, Jordan, Timor-Leste,
Palestine, Laos, Armenia, Georgia, Maldives, Cyprus, Kuwait, Qatar, Peru,
Bahrain, Brunei, Finland, France, Germany, Ireland, Iceland, UK, US,
Greece, Hungary, Italy, Norway, Poland, Slovakia, Sweden, Canada, Fiji,
Romania, Cuba, Panama, Brazil, Colombia, Chile, Argentina, Venezuela,
Naypyidaw, Kathmandu, Bangkok, Hanoi, Manila, Kuala Lumpur, Jakarta, Tunis,
Jurong East, Taipei City, Hobart, Sri Jayawardenepura Kotte, Dhaka, Thimphu,
Phnom Penh, Canberra, Wellington, Kabul, Dushanbe, Bishkek, Astana, Abuja,
Tashkent, Ashgabat, Tehran, Abu Dhabi, Riyadh, Muscat, Sana’a, Baghdad, Pretoria,
Baku, Ankara, Damascus, Beirut, Jerusalem, Nairobi, Cairo, Juba, Asmara, Rabat,
Djibouti city, Addis Ababa, Tripoli, Kigali, Bamako, Niamey, N’Djamena, Bangui,
Yaoundé, Mogadishu, Kinshasa, Kampala, Dodoma, Luanda, Lusaka, Antananarivo,
Lilongwe, Windhoek, Porto-Novo, Harare, Gaborone, Maseru, Cape Town, Bloemfontein,
Algiers, Mbabane, Lobamba, Monrovia, Freetown, Banjul, Dakar, Maputo, Lomé, Dili,
Nouakchott, Ouagadougou, Accra, Malabo, Amman, Vientiane, Yerevan, Tbilisi, Rome,
Malé, Nicosia, Kuwait City, Doha, Lima, Manama, Bandar Seri Begawan, Paris,
Helsinki, Berlin, Dublin, Reykjavík, London, Washington D.C., Athens, Budapest,
Oslo, Warsaw, Bratislava, Stockholm, Ottawa, Suva, Bucharest, Havana, Panama City,
Brasília, Bogotá, Santiago, Buenos Aires, Caracas, Mumabi, Chennai, Bengaluru,
Kolkata, Hyderabad, Pune, Ahmedabad, Jaipur, Surat, Visakhapatnam, Indore, New Delhi
Lucknow, Nagpur, Kochi, Kanpur, Guwahati, Coimbatore, Noida, Ghaziabad, Patna